Publications

The scientific article is officially published in 2019

1. PH Pham, KT Hoang, Dich Quang Nguyen, "Trapezoidal-shaped electrostatic comb-drive actuator with large displacement and high driving force density", Microsystem Technologies, January 2019.

2. Thanh Ngo Ngoc, Eleonora Riva Sanseverino, Ninh Nguyen Quang, Pietro Romano, Fabio Viola, Binh Doan Van, Hoang Nguyen Huy, Thang Tran Trong, Quang Nguyen Phung, "A hierarchical architecture for increasing efficiency of large photovoltaic plants under non-homogeneous solar irradiation", Solar Energy, Volume 188, pp. 1306-1319, July 2019.

3. Phuong Nguyen, Phuong Vu, Nam Hoang, Ngoc Nguyen,Quan Nguyen, Hung Do, "A systematic parameter tuning of PI current controller for LCL-type active rectifiers under unbalanced grid voltage conditions", Journal of Electrical Systems,  Volume 15, Issue 1, March 2019.

4. NT Dung, Dang Phuong Nam, Nguyen Quang Dich, "Modelling and Control Design of a V-Shaped Thermal Actuator System via Partial Derivative Equation Approach", International Journal of Electrical Electronics & Computer Science Engineering (IJEECSE), February 2019.

5. Nguyen Hong Quang, Nguyen Phung Quang, Nguyen Nhu Hien, "Modelling Polysolenoid Permanent Stimulation Linear Motors for Real Time Simulation Problem", International Journal of Electrical Electronics & Computer Science Engineering (IJEECSE), Volume 6, Issue 1, pp 3-7, February 2019.

6. Thang Diep-Thanh, Quang Nguyen Phung, Huy Nguyen-Duc, "Stochastic Control for Optimal Power Flow in Islanded Microgrid", International Journal of Electrical and Computer Engineering (IJECE), Volume 9, no. 2,  pp. 1045-1057, April 2019.

The article published in the journal is included in the ISI list of 2018

1. Tri-Vien Vu, Truong Van Vu, Dang Thanh Bui, "Numerical study of deformation and breakup of a multi-core compound droplet in simple shear flow", International Journal of Heat and Mass Transfer, Volume 131, pp. 1083 - 1094, March 2019.

2. Cung Thanh Long, Dao Duc Thinh, Nguyen Cong Phuong, Bui Dang Thanh, "A model-based approach for estimation of the crack depth on a massive metal structure", Journal on Measurment and Control, Vol 51, Issue 5-6, June-July 2018, ISSN: 0020 - 2940

3. Duy-Dinh Nguyen, Goro Fujata, Quang Bui Dang, Minh C. Ta, "Reduced-order Observer-based Control System for Dual-Active-Bridge DC/DC Converter", IEEE Transactions on Industry Applications, Vol 54, Issure: 4, July-Aur 2018. ISSN: 0093-9994

4. Tran Thi-Thao*, Fang Te-Yung, Pham Van-Truong*,Lin Chen*; Wang Pa-Chun; Lo Men-Tzung, “Development of an Automatic Diagnostic Algorithm for Pediatric Otitis Media,” Jourrnal of Otology and Neurotology, Vol 39, Issue 8 – p 1060-1065, September 2018

Articles published in international journals are included in the Scous list of 2018

1. Hong Quang Nguyen, Phung Quang Nguyen, Nhu Hien Nguyen, Thanh Binh Nguyen, "Min Max Model Predictive Control for Polysolenoid Linear Motor", Intern Journal of Power Electronics and Drive Systems, vol 9, no 4, ISSN 2088-8694.

2. Danh Huy Nguyen, Tung Lam Nguyen, Manh Linh Nguyen, Huy Phuong Nguyen, "Nonlinear control of an active magnetic bearing with output constraint", International Journal of Electrical and Computer Engineering, Vol 8, No.5 Part 2 2018, ISSN 2088-808.

Articles published in international journals are not included in the 2018 ISI list

1. Phuong Vu*, Ngoc Dinh*, Nam Hoang*”, Quan Nguyen**, Dich Nguyen*, Minh Tran “A generalized parameters tuning of PR Controllers for dynamic voltage restorer”, International Journal of Power Electronics and Drive System (IJPEDS), Vol 9, No 4, December 2018.

2. Ng. Ph. Quang, Võ Thanh Hà, Trần Vũ Trung, "A New Control Design with Dead-Beat Behavior for Stator Current Vector in Three-Phase AC Drives," SSRG Intern. Journal of Electrical and Electronics Engineering IJEEE, vol. 5, issue 4, pp. 1-5, ISSN 2348-8379

3. TL Nguyen, MD Duong, TH Do,” A Direct Lyapunov-Backstepping Approach for Stabilizing Gantry Systems with Flexible Cable”, Proceedings of Engineering and Technology Innovation, Vol 8 2018, ISSN 2413-1476 (Print), 2518-833X (online)

4. Tung Lam Nguyen, Minh Duc Duong, “Nonlinear Control of Flexible Two-Dimensional Overhead Cranes”, Chapter 16, Adaptive Robust Control Systems, January 2018,  ISBN 978-953-51-3796-2

Article published in domestic magazine in 2018

1. Vũ Hoàng Phương, Nguyễn Đình Ngọc, Trần Trọng Minh, Nguyễn Quang Địch, “Bộ điều chỉnh kiểu cộng hưởng cho bộ biến đổi phía tải trong hệ điều áp tích cực”, Số 21, Chuyên san Đo lường, Điều khiển và Tự động hóa, 06/2018,  ISSN 1859-0551

2. Ngo Ngoc Thanh, Nguyen Phung Quang, "Simulation of Reconfiguration System Using Matlab - Simulink Environment," Journal on Computer Science and Cybernetics, vol. 34, no. 2 (2018), pp. 127-143, ISSN 1813-9663

3. Võ Thanh Hà, Nguyễn Đức Nam, Ng. Ph. Quang, "Thiết kế backstepping điều khiển truyền động không đồng bộ hệ hai khâu quán tính nuôi bởi nghịch lưu nguồn áp có vòng điều khiển dòng stator lý tưởng," Chuyên san Đo lường, Điều khiển và Tự động hóa, quyển 21, số 1, tr. 16-23, ISSN 1859-0551

4. Giang Hồng Quân, Nguyễn Danh Huy, Nguyễn Tùng Lâm, Giang Hồng Bắc, “Điều khiển ổ đỡ từ chủ động bằng phương pháp Backstepping Sliding Mode control” Tạp chí KHCN, ĐH Bách Khoa Hà Nội, Số 124 (1/2018), ISSN 2345-1083

The article was published on the summary of the international conference in 2018

1. Vu Hoang Phuong, Tran Trong Minh, Vu Thi Ngoc Van, Nguyen Huy Phuong, Nguyen Quang Dich “A Linear control for Active voltage conditioner”, The 3rd ASEAN Smart Grid Congress & The 5th International Conference on Sustainable Energy, ISBN: 978-604-73-5710-9, 2018

2. Vo Thanh Ha, Hoang Thanh Nam, Vu Hoang Phuong, Tran Trong Minh, Nguyen Quang Dich, Hoang Trung Thong, “FCS-Model Predictive Control of Induction Motors fed by MultilLevel Casaded H-Bridge Inverter”, The 11th Regional Conference on Electrical and Electronics Engineering 2018 (RCEEE 2018)

3. Van Anh Vu, Tuan Christian TRUVANT, Dong Cong Trinh, Thanh Dang Bui, “Design of automatic irrigation system for Greenhouse based on LoRa technology,” Proceeding of Conference on Advanced Technologies for Communications (ATC), 2018 IEEE International Conference on, October 18-20, 2018, Ho Chi Minh City, ISBN: 978-1-5386-6541-1 , Vietnam

4. Nguyen Nhu Hien,Tran Minh Truong, Nguyen Huy Phuong, Vu Hoang Phuong, Quang Bui Dang, Nguyễn Đình Ngọc,Nguyen Quang Dich, “Implementation of PMSM Servo Drive Using Digital Signal Processing”, The 11th Regional Conference on Electrical and Electronics Engineering 2018 (RCEEE 2018)

The article was published on the conference proceedings of the domestic conference in 2018

1. Bùi Thanh Hòa, Nguyễn Tùng Lâm, Dương Minh Đức, “Điều khiển hạn chế dao động cho cầu trục”, Hội thảo Điều khiển và Tự động hóa cho phát triển và bền vững-2017, Quí 1, 2018, ISBN: 978-604-67-1083-7

2. Nguyễn Danh Huy, Nguyễn Tùng Lâm, Nguyễn Trung Đức, “Tổng hợp bộ điều khiển phi tuyến cho ổ đỡ từ chủ động bằng phương pháp Lyapunov”, Hội thảo Điều khiển và Tự động hóa cho phát triển và bền vững-2017, Quí 1, 2018, ISBN: 978-604-67-1083-7